RemGame - This Tech demo looks super cool for the Commodore Amiga!

Here on Indie Retro News we've been flooded with new Amiga game updates, as we've had Maria Renard's Revenge, Boxx, Agonman, and even Creeping Me Out Hex Night, Well here we are with yet ANOTHER Amiga news story to tell you about, as Saberman was kind enough to let us know earlier today, that he has done a new video of the rather lovely looking Tech Demo of 'RemGame' by remz; A tech demo which the creator says is their first C/ASM Amiga.

Here is what is described about this tech demo via the EAB Forums "Hello everyone! I have assembled an ADF image on my little game/tech-demo I have been working on for the past few months. This is my first C/ASM Amiga game, so it took a fairly long time and was very challenging and fun to work on. I would be extremely grateful to have your input, comments, suggestions about it. Should it be useful to others, I could put the whole project and source code on GitHub, but otherwise I would be happy to answer any questions too. As I mentioned, this being my first serious game project on an Amiga, it is certain that a lot of things could be done better, safer, more compatible, more efficient, etc".

The technical specs:

  • - Detects PAL and NTSC, so it should work on both systems
  • - Runs at full frame rate (50Hz or 60Hz), scrolling in 8 directions
  • - Uses lowres HAM 6-bitplane mode
  • - Dynamic sprite management system: it groups sprites by pair, and recycles sprites across the screen vertically: the system can display a maximum of 104 sprites.
  • - On an example screen like the one in the screenshot, there is about 80 visible moving sprites, some are animating
  • - Sprites are being recolored by the copper: 12 colors per scanline to be precise. This means a theoretical limit of 2880 colors could be displayed just for the sprites. With the current sprite sheet I used, the sprites are using 265 colors.
  • - The background tiles are in HAM, which means up to the full palette of 4096 colors, and arranged in such a way show fringeless horizontally scrolling
  • - The tiles are shaded at runtime according to light sources (i.e., torches) with a scanline-dithering technique to allow approximately 30 level of darkening
  • - There is a single bitmap buffer (i.e.: no double buffering), so everything is rendered with carefully timed 'racing-the-beam' blits.
  • - The copper list is also a single list, so all real-time modification of the copper list is done with careful timing
  • - joystick control (port 2) and keyboard are supported
  • - I tried to make it as system friendly as I could: the game can be directly booted from floppy or installed on RAM: or hard drive or anything else and should work correctly.
  • - It works on kickstart 1.2 and anything above. However, on Amiga 1000 with a kickstart older than that, my startup-sequence is doing run <NIL: >NIL: RemGame.exe >NIL: which is not supported so it fails to start; but removing that and it works fine (tested in WinUAE)
  • - So far, I've only tested it on WinUAE: my only attempt to run it on hardware was on my Vampire V4, and it crashed horribly. I cannot fully trust that the V4 implementation is 100% compliant with a real Amiga, so for now I do not know how well my game would fare on real hardware.
  • - Technically it should boot and work on a real CDTV and Amiga CD32, but I've only tested on WinUAE for now.
  • - It runs on OCS, and requires only a 512KB chip ram Amiga, so normally any plain Amiga 500/2000, or Amiga 1000 with 512KB should work

14 comments:

  1. thanks for your hard work, looks as an engine very robust.

    ReplyDelete
  2. AMAZING
    Take note monochrome Amiga game programmers

    ReplyDelete
    Replies
    1. monochrome is not a failing, it's a stylistic choice. Jeez. People still make mono games for modern PCs.

      Delete
  3. Looks like a modern retrogame. Fantastic colors.

    ReplyDelete
  4. What a mad genius. This is absolutely mental.

    ReplyDelete
  5. Very clever use of a particularly tricky graphics mode. Nice one!

    ReplyDelete
  6. Looks amazing, definitely want to see more from this prototype and engine/techniques in general.

    ReplyDelete
  7. WOW! Some real modern Amiga coding! It is so nince to see what a non-AGA Amiga can really do and not only Scorpion Engine projects!

    ReplyDelete
  8. Brilliant! Classic Amiga development is still alive and it is better then ever.

    ReplyDelete
  9. I wonder if this tech could be used for the Xevious port?

    ReplyDelete
    Replies
    1. Xevious is just wasting colors it needs an artist. Just play the original it only looks like a couple of dozen colors at the most.

      Delete
  10. looks like a game i'd really enjoy!!

    ReplyDelete

Constructive criticism allowed, but abusive comments will be removed and you will be IP banned! Banned users will not show up in my comment feed, you will be gone for good as will all of your posts! - Play nice, ENGLISH ONLY and enjoy IndieRetroNews!