The legendary 1986 Konami arcade classic Life Force (Salamander) has made its way to the Commodore Amiga, thanks to a brand-new homebrew port by developer TjLaZer with the assistance of AI. Released as version 1.0, this adaptation brings the iconic Gradius spin-off to the Commodore AGA, including the A1200 and A4000. Players can finally experience the game's two-player cooperative action and its unique mix of horizontally and vertically scrolling stages right on their classic hardware. The conversion faithfully captures the tense sci-fi action and the simplified power-up mechanic that helped redefine the shoot-'em-up genre forty years ago.
To run this port, you'll will need an Amiga equipped with an AGA chipset, at least a 68020 processor, 2MB of Chip RAM, and additional Fast RAM. However, to truly replicate the smooth, speed of the original arcade classic, standard hardware won't quite cut it. The developer strongly recommends an accelerator card, noting that while a 030 processor running at 50MHz will get you off the ground, a powerhouse 060 or a modern Vampire accelerator is ideal for the ultimate gameplay experience.
Links :1) Source 2) Salamander
Doesn't work on my 060 4000 :(
ReplyDeleteNot impressed by the required spec, especially when the fan port of gradius was much less
ReplyDeleteV1.9 out, has 20% speed increase in full mode, and various display options for lower spec Amigas:
DeleteOptions screen/DETAIL now has four settings: FULL, FAST, SCANLINES, ALTERNATE.
FULL: the arcade picture line for line.
FAST: draws every other line and shows each one twice. About 30% less work, but blockier.
SCANLINES: draws every other line and shows a dark line under each one, like an arcade monitor. The picture is darker.
ALTERNATE: draws the even lines one time and the odd lines the next, and shows both together. You get full resolution for the same work as FAST, with some combing on fast movement, like an interlaced picture.
FAST, SCANLINES and ALTERNATE are meant for 68030 and slower 68040 Amigas. - New patch